Carrier-access Bridge/Router 3104s Manual do Utilizador

Adit 3104QUICK START GUIDEPart Number: 002-0219-0410Product Release: 1.6September 2007

10 Adit 3104 - Release 1.6Quick StartInstallationAdit 3104, 3200 and 3400 Battery Backup Note: This is an Optional Feature.The Adit 3104, 3200 and 34

Adit 3104 - Release 1.6 11 Quick StartChassis OverviewChassis Overview(1) 10/100Base-TEthernet (WAN)(4) 10/100Base-TEthernet (LAN) Tip & Ring Te

12 Adit 3104 - Release 1.6Quick StartInterface ConnectorsInterface ConnectorsFront of Aditz (1) DS1 WAN port (RJ-48C). Note: E1 will be in a future r

Adit 3104 - Release 1.6 13 Quick StartInterface ConnectorsPower The Adit 3000 is powered by a limited -48 VDC Power source. The following options ar

14 Adit 3104 - Release 1.6Quick StartInterface Connectors25-Pair Telco ConnectorTip and Ring Analog Interfaces equipped with standard 25-pair Telco C

Adit 3104 - Release 1.6 15 Quick StartInterface ConnectorsRS-232 Craft Port (Female DB-9)The RS-232 craft port connector (female) is for connection

16 Adit 3104 - Release 1.6Quick StartInterface ConnectorsDS1/E1 Connection PortsEach DS1/E1 connection port is equipped with a standard RJ-48C (femal

Adit 3104 - Release 1.6 17 Quick StartReset Button10/100Base-TX Ethernet The 10/100Base-TX Ethernet (female) ports provide connectivity for Router W

18 Adit 3104 - Release 1.6Quick StartAlarm/Status LEDsAlarm/Status LEDsLED State DescriptionCritical Off No critical alarms presentRed Critical alarm

Adit 3104 - Release 1.6 19 Quick StartWeb-Based ManagementWeb-Based ManagementThe web-based management interface allows you to control various syste

Copyright 2007 Carrier Access Corporation. All rights reserved.The information presented in this manual is subject to change without notice and does n

20 Adit 3104 - Release 1.6Quick StartSetting up a CLI ConnectionSetting up a CLI ConnectionA CLI connection will require the LAN or WAN IP address of

Adit 3104 - Release 1.6 21 Quick StartLog inLog inAfter successful connection, via telnet or HyperTerm, the user must login. Default Logins are:Logi

22 Adit 3104 - Release 1.6Quick StartKey Enabled Software FeaturesKey Enabled Software FeaturesThe Adit 3104 has additional features that are not pro

Adit 3104 - Release 1.6 23 Quick StartBasic ConfigurationBasic ConfigurationThe following configuration is divided into logical sections, where each

24 Adit 3104 - Release 1.6Quick StartBasic ConfigurationRestore Factory DefaultsIf the unit is not out-of-the-box, you may want to verify that the un

Adit 3104 - Release 1.6 25 Quick StartBasic ConfigurationModify Default Admin UserFor security purposes it is recommended that the Administrator Use

26 Adit 3104 - Release 1.6Quick StartBasic Configurationz Modify the User information, and select OK to save. It is important to note that you need t

Adit 3104 - Release 1.6 27 Quick StartBasic ConfigurationConfigure Ethernet WAN InterfaceIn the web-browser:1. Select Network Connections from the N

28 Adit 3104 - Release 1.6Quick StartBasic Configuration6. Set Internet Protocol to Obtain an IP Address Automatically, from the pulldown menu. This

Adit 3104 - Release 1.6 29 Quick StartBasic ConfigurationConfigure Serial1 as WANIn the web-browser:1. Select Network Connections from the Navigatio

QUICK START GUIDEQuick StartIn this Guide Unpacking and Inspection  Installation Environment User Safety Installation- Compliant Installation- Fer

30 Adit 3104 - Release 1.6Quick StartBasic Configuration6. Select the Enable button.

Adit 3104 - Release 1.6 31 Quick StartBasic ConfigurationConfigure the Adit 3104 as a SIP Line GatewayIn the web-browser:1. Select Voice Over IP fro

32 Adit 3104 - Release 1.6Quick StartBasic Configuration6. Select the Phone Settings tab.7. Select the Action icon on line #1 to edit.

Adit 3104 - Release 1.6 33 Quick StartBasic Configuration8. Enter a telephone number in the User ID field and select OK.9. Repeat this step for each

34 Adit 3104 - Release 1.6Quick StartBasic Configuration

4 Adit 3104 - Release 1.6Quick StartUnpacking and InspectionUnpacking and InspectionWARNING! OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DEVICES

Adit 3104 - Release 1.6 5 Quick StartUser SafetyUser SafetyCAUTION! WHEN USING YOUR TELEPHONE EQUIPMENT, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE

6 Adit 3104 - Release 1.6Quick StartInstallationCompliant InstallationNOTE: It is important the DS1/E1 Network Interface Cables are secured separate

Adit 3104 - Release 1.6 7 Quick StartInstallationWall MountingBefore beginning the mounting process, verify that the installation area is a stable e

8 Adit 3104 - Release 1.6Quick StartInstallationRack Mounting (Optional Feature)NOTE: Rack mounting kits are available for both 19 and 23 inch racks

Adit 3104 - Release 1.6 9 Quick StartInstallation3. Place the Adit 3000 on the Tray Slide and attach with the 4 screws removed in step 2. 4. Slide t