Carrier-access Adit 3000 Series and Multi-Service Router (MSR) Ca Manual do Utilizador Página 186

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 496
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 185
4-60 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI
Global Configuration Mode
Global Configuration Commands
Example: (config)# service id 5 name test description desc1 protocol gre
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
snmp-server
The following are the commands to set the SNMP server configuration. To disable SNMP, see no snmp-
server command on page 4-50.
snmp-server community
Use the snmp-server community command to set the SNMP community name.
Syntax: (config)# snmp-server community community-name {ro|rw}
Example: (config)# snmp-server community communitytestname ro
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
snmp-server enable
Use the snmp-server enable command to enable SNMP on the system.
Syntax: (config)# snmp-server enable
Example: (config)# snmp-server enable
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
server-src-port Defines the server source/destination port. Syntax:
server-src-port {port|port-port|any} server-dst-port {port|port-
port|any}
server-src-port port - Enter the server source port to apply the service to.
port-port - Enter a range of ports to apply the service to.
any - Apply to any port.
server-dst-port port - Enter the server destination port to apply the service to.
port-port - Enter a range of ports to apply the service to.
any - Apply to any port.
Field Definition
community-name Enter the SNMP Community Name.
ro Read only - Set the community name to read only permission.
rw Read write - Set the community name to read and write permission.
Vista de página 185
1 2 ... 181 182 183 184 185 186 187 188 189 190 191 ... 495 496

Comentários a estes Manuais

Sem comentários