Carrier-access Adit 3000 Series and Multi-Service Router (MSR) Ca Manual do Utilizador Página 292

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 496
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 291
12-22 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI
Configuration - Multilink Interface Mode
ppp link-fragmentation
Use the Multilink Interface ppp link-fragmentation command to configure the threshold byte size of
the packet, for Interleaving. Note: If the packet is > the set threshold, the packet will be split in half and
sent.
Syntax: (config-int-mlink-{n})# ppp link-fragmentation number
Example: (config-int-mlink-1)# ppp link-fragmentation 600
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
ppp on-demand
Use the Multilink Interface ppp on-demand command to enable on demand the feature. On demand
attempts to connect only when packets are sent. To disable PPP on demand, see no ppp on-demand
command on page 12-19.
Syntax: (config-int-mlink-{n})# ppp on-demand
Example: (config-int-mlink-1)# ppp on-demand
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
ppp password
Use the Multilink Interface ppp password command set the PPP password. To delete a PPP password,
see no ppp password command on page 12-19.
Syntax: (config-int-mlink-{n})# ppp password password
Example: (config-int-mlink-1)# ppp username test-user-pswrd
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
Field Definition
number Range 320 - 1600, with a default of 1600 bytes.
Field Definition
password Enter the PPP password, with a maximum of 19 characters.
Vista de página 291
1 2 ... 287 288 289 290 291 292 293 294 295 296 297 ... 495 496

Comentários a estes Manuais

Sem comentários