Carrier Access Network Device Axxius 800 Manual do Utilizador descarregar pdf (Página 173)

100

101

Axxius 800 - Release 2.2 5-73

CLI Commands

set

set (bri) mode

Use the set (bri) mode command to set the mode for the ISDN BRI Service.

Syntax: set {bri_card-addr} mode {setting}

Example: set 4 mode nt3ds0

To set the BRI card in slot 4 to use 3 DS0 LUNT

{bri_card-addr}

The slot number (1-8) of the Adit chassis that contains the BRI card.

{setting}

set (bri) pmsync

Use the set (bri) pmsync command to set the source for performance monitoring

synchronization.

Syntax: set {bri_card-addr} pmsync {setting}

Example: set 4 pmsync axxius

To set the BRI card in slot 4 source for performance monitoring synchronization

to Axxius.

{bri_card-addr}

The slot number (1-8) that contains the BRI card.

{setting}

Set the operating mode to one of the following:

lt3ds0 Set the BRI card mode to 3 DS0 LULT, used primarily for a subscriber line.

nt3ds0 Set the BRI card mode to 3 DS0 LUNT, used primarily for a central office

connection.

axxius Set source to the Axxius

switch Set source to the switch

1 2 ... 168 169 170 171 172 173 174 175 176 177 178 ... 567 568

Comentários a estes Manuais

Sem comentários

Carrier Access Network Device Axxius 800 Manual do Utilizador Página 173

Comentários a estes Manuais

Manuais e produtos relacionados com Redes Carrier Access Network Device Axxius 800