Carrier Access Network Device Axxius 800 Manual do Utilizador descarregar pdf (Página 82)

100

101

4-10 Axxius 800 - Release 2.2

Configuration

Basic System Setup

Set Up a Single Channel POTS card

Use the following commands to set up a POTS card.

Change the IP Address of the DS0 Management Channel

Use the following commands to change the IP over DS0 Management Channel for the

Axxius 800.

Command Description

set {fxsPS-addr|fxsPSM-addr}

{ls|lsrb}

Set the signaling option for the port. See the

set (fxsPS or fxsPSM) command for details.

set {fxsPS-addr|fxsPSM-addr}

rxgain {n}

Set the receive gain/loss in dB. See the set

(fxsPS or fxsPSM) command for details.

set {fxsPS-addr|fxsPSM-addr}

txgain {n}

Set the transmit gain/loss in dB. See the set

(fxsPS or fxsPSM) command for details.

Command Description

set ipds0 down Set the DS0 management channel down

set ipds0 ip address {ip-addr} Set the DS0 management channel IP address.

set ipds0 up Set the DS0 management channel up.

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 567 568

Comentários a estes Manuais

Sem comentários

Carrier Access Network Device Axxius 800 Manual do Utilizador Página 82

Comentários a estes Manuais

Manuais e produtos relacionados com Redes Carrier Access Network Device Axxius 800