Carrier Access Network Device Axxius 800 Manual do Utilizador descarregar pdf (Página 221)

100

101

Axxius 800 - Release 2.2 5-121

CLI Commands

set

set (router) port prompt

Use the set (router) port prompt command to set the authentication prompt on a TSR port.

Syntax: set {tsr_card-addr} port {port-number} prompt

{disable|enable}

Example: set 1 port 2 prompt enable

This command will enable the authentication prompt for port 2 on the TSR card

in slot 1.

{tsr_card-addr}

The slot number (1-8) that contains the TSR card.

{port-number}

The port number (1-4) of the TSR card.

{disable|enable}

set (router) port protocolport

Use the set (router) port protocolport command to set the protocol port on a TSR port.

Syntax: set {tsr_card-addr} port {port-number} protocolport

{protocol-port}

Example: set 1 port 2 protocolport 1024

This command will set the protocol port to 1024 for port 2 on the TSR card in

slot 1.

{tsr_card-addr}

The slot number (1-8) that contains the TSR card.

{port-number}

The port number (1-4) of the TSR card.

{protocol-port}

The protocol port range is 1 - 65525. 0 is the wildcard, any port designator.

disable Disable the Authentication Prompt on a TSR port

enable Set the Authentication Prompt on a TSR port

1 2 ... 216 217 218 219 220 221 222 223 224 225 226 ... 567 568

Comentários a estes Manuais

Sem comentários

Carrier Access Network Device Axxius 800 Manual do Utilizador Página 221

Comentários a estes Manuais

Manuais e produtos relacionados com Redes Carrier Access Network Device Axxius 800